[Elecraft] K3 and SignaLink USB Interface

[Lee Buller]

this works great.   this is how I did it and it works great

Lee K0WA



 The New Kansas QSO Party - August 29, Sat 9am-9pm and August 30 Sun 9am-3pm CDT 
More Info at:  http://www.ksqsoparty.org/

In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?




________________________________
From: Don Wilhelm <w3fpr at embarqmail.com>
To: Michael M. Raskin <rask1553 at bellsouth.net>
Cc: elecraft at mailman.qth.net
Sent: Monday, August 24, 2009 5:46:44 PM
Subject: Re: [Elecraft] K3 and SignaLink USB Interface

Mike,

Using the ACC connector will not help a lot - there are no audio signals 
there, so the only applicable input at the ACC connector would be PTT 
IN.  It would seem just as easy to use the PTT RCA jack on the K3 
because you would be connecting to the LINE IN and LINE OUT for audio.  
The LINE OUT is pre-AF gain, you set the level using CONFIG: LIN OUT in 
the menu.

73,
Don W3FPR

Michael M. Raskin wrote:
> Anyone using this combo with the ACC (15-pin) instead of the mic jack?  DX Engineering, and well as TigerTronics, sell all kinds of pre-made cables but only a mic cable for the K3.  I'd rather connect to the ACC, as I do with the IC-7800, where the audio signal is not dependent on the AF volume or mic gain settings.
>
> Mike, W4UM
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html