[Elecraft] K3 Autonotch Gremlin

[Dick Dievendorff]

Perhaps, but I don't think that's likely.

The K3 Utility causes an MCU reset (a "reboot") after loading each firmware
file. That's what's happening when the display goes dark for a second or two
after loading each firmware file.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of K9ZTV
Sent: Monday, August 17, 2009 10:37 AM
To: Elecraft
Subject: Re: [Elecraft] K3 Autonotch Gremlin

I suspect the reason some are experiencing "not working" one day and
"working" the next day is that they are overlooking the requirement to
reboot the K3 following each firmware upgrade (just like a computer,
which it is).

73,

Kent  K9ZTV




Someone wrote:
> When I downloaded v.3.25 the autonotch did not seem to work on any band.
The next day I tried the autonotch and it worked well on a 40 meter
broadcast heterodyne 
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html