[Elecraft] Auto-Notch Broken in 3.25 (I probably missed this)

[Phillip Buckholdt]

Auto noych works fine here also. NR much inproved onSSB with only a  little 
loss of gain. Been using 3.25 two weeks.

     73 Phil

----- Original Message ----- 
From: "Dick Roth, KA1OZ" <raroth7 at comcast.net>
To: "Ron D'Eau Claire" <ron at cobi.biz>
Cc: "'hb9brj'" <hb9brj at gmail.com>; <elecraft at mailman.qth.net>
Sent: Sunday, August 16, 2009 6:10 PM
Subject: Re: [Elecraft] Auto-Notch Broken in 3.25 (I probably missed this)


> Ron D'Eau Claire wrote:
>> Strange - it works just as described in the Owner's manual here: auto 
>> notch
>> on SSB, manual (only) on AM/CW/DATA.
>>
>> Is it possible your AGC was turned off?
>>
>> Ron AC7AC
>>
>> -----Original Message-----
>>
>> Dick Roth KA1OZ wrote:
>>> Tried listening for the Elecraft SSB net at 1800.  There was a
>>> heterodyne or other interfering signal on 14.316.  I tried to use
>>> Auto-Notch, but nothing changed.  Then I went to manual and notched it
>>> out completely.
>>>
>>
>> Same thing here. Auto Notch is gone in 3.25.
>>
>> 73, Markus HB9BRJ
>
> AGC is on.  Here are the settings:
>
> AGC Delay nor
> AGC Hold 000
> AGC PLS nor
> AGC SLP 002
> AGC THR 008
> AGC-F 140
> AGC-S 010
>
> Otherwise, the function appears to work properly when in manual mode.
>
> -- 
> 73,
> Dick ka1oz
> Middleborough, MA
>
> Radio:  Elecraft K3/100(Kit) SN 859
> Antenna:  Titan-DX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>