[Elecraft] K3 FW3.25 Auto-Notch Filter problem.

[Stewart]

As you say Brett ... Interesting.
I will try it again, and look for any new Menu settings that may have crept in unnoticed.
This was on SSB, a mode which I use almost 100% of the time.

73
Stewart G3RXQ
On Sat, 15 Aug 2009 02:24:57 -0700, Brett Howard wrote:
> Interesting..  Mine seems to be working as it did before.  I just tied
> it on a few AM stations near 40.  Got in the area in LSB got it setup
> with the carrier in my window hit the button and poof gone.
>
> I then found another tone that seemed to be drifting back and forth a
> little bit and hit the auto notch on that.  It seemed to notch it but
> was following it a bit slowly so it was just off of it every so often
> but it was updating and keeping things quieter.
>
> I also QSYed quickly when the notch was doing its thing and you hear the
> tone come back for a short bit then you hear the filter slide over and
> keep the carrier covered up.
>
> Are you sure you're in a mode that supports the auto notch?  Its not
> supported in DATA or CW.
>
> ~Brett (KC7OTG)
>
>
> On Sat, 2009-08-15 at 10:07 +0100, Stewart wrote:
>> am finding the same here - AGH !
>>
>> The Manual notch is fine, however, although there is a slight
>> notching action in Auto it is virtually useless.