[Elecraft] New K3 Utility versoin 1.2.8.10 (for Windows) available on Elecraft web site

[Dick Dievendorff]

The signal generator should have the ability to send an S9 signal  
( -73 dBm) on a frequency the K3 receives. I think that's about it.

Dick

Sent from my iPhone

On Aug 12, 2009, at 1:17 PM, Brett Howard <brett at livecomputers.com>  
wrote:

> What is required of a signal generator to do the RF gain calibration?
>
> On Wed, Aug 12, 2009 at 11:30 AM, Dick  
> Dievendorff<dieven at comcast.net> wrote:
>> K3 Utility version 1.2.8.10 (for Windows only, the Mac and Linux  
>> ports are
>> in progress and will follow shortly) is available on Elecraft's K3  
>> software
>> web page http://www.elecraft.com/K3/k3_software.htm.
>>
>>
>>
>> K3 Utility changes since 1.2.3.18 include:
>>
>>
>>
>> -          Support for the RF Gain calibration procedure (see  
>> Configuration
>> page, RF Gain calibration button).  The RF Gain calibration procedure
>> requires MCU firmware 3.25 and later (beta firmware).
>>
>>
>>
>> -          A function to set the K3's date and time to the value of  
>> the
>> personal computer's clock (TU W4SMT, W6FVI).  This is also on the
>> Configuration tab page, "Set K3 Date and Time" button.
>>
>>
>>
>> -          DSP firmware load now includes a fresh load of the  
>> associated
>> DTBL table file.
>>
>>
>>
>> -          Installer now permits the K3 Utility to be installed on  
>> Windows
>> 98 as well as later versions.
>>
>>
>>
>> -          Enable configuration save on MCU revisions earlier than  
>> 2.48.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>