[Elecraft] New K3 Utility versoin 1.2.8.10 (for Windows) available on Elecraft web site

[Brett Howard]

What is required of a signal generator to do the RF gain calibration?

On Wed, Aug 12, 2009 at 11:30 AM, Dick Dievendorff<dieven at comcast.net> wrote:
> K3 Utility version 1.2.8.10 (for Windows only, the Mac and Linux ports are
> in progress and will follow shortly) is available on Elecraft's K3 software
> web page http://www.elecraft.com/K3/k3_software.htm.
>
>
>
> K3 Utility changes since 1.2.3.18 include:
>
>
>
> -          Support for the RF Gain calibration procedure (see Configuration
> page, RF Gain calibration button).  The RF Gain calibration procedure
> requires MCU firmware 3.25 and later (beta firmware).
>
>
>
> -          A function to set the K3's date and time to the value of the
> personal computer's clock (TU W4SMT, W6FVI).  This is also on the
> Configuration tab page, "Set K3 Date and Time" button.
>
>
>
> -          DSP firmware load now includes a fresh load of the associated
> DTBL table file.
>
>
>
> -          Installer now permits the K3 Utility to be installed on Windows
> 98 as well as later versions.
>
>
>
> -          Enable configuration save on MCU revisions earlier than 2.48.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>