[Elecraft] Line In not working ?

[Julius Fazekas n2wn]

Mario,

Check to make sure your input is checked in your OS or Sound Card software.
That was one of my problems when I first set mine up. Mine wouldn't stay
checked either until I updated the drivers.

73,
Julius


Mario Lorenz wrote:
> 
> Hello,
> 
> getting finally around to setting up my K3 for RTTY/PSK,
> ie. hooking the line in/out to the computer, I noticed that
> Line In doesnt work for me.
> 
> - Cables are OK (tested by plugging into MIC IN, the signal
> is rather loud but there)
> - MICSEL to LineIn, and line level have been tried up to 60
> - Some time ago when I had my K3 open I had done all the mods re. audio
> (mainly line out and the gnd mods) . I double-checked and all seems as
> per spec...
> - Using an ohmmeter to measure into line-in yields 630 ohm which looks
> about right as per schematic, so I didnt short-circuit things...
> - I updated firmware to 3.10
> 
> Could someone please confirm that Line In does work with fw rev 3.10 ?
> Any further ideas ?
> 
> Mario
> 
> -- 
> Mario Lorenz                            Internet:    <ml at vdazone.org>
>                                         Ham Radio:  
> DL5MLO at DB0ERF.#THR.DEU.EU
> The deorbiting of MIR was brought to you by radio FFH and MIRcrosoft, your
> specialist for controlled crashes!  (local radio station, on the very day)
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 


-----
Julius Fazekas
N2WN

Tennessee Contest Group
http://www.k4ro.net/tcg/index.html

Tennessee QSO Party
http://www.tnqp.org/

Elecraft K2/100 #4455
Elecraft K3/100 #366
-- 
View this message in context: http://n2.nabble.com/Line-In-not-working---tp2657232p2663250.html
Sent from the Elecraft mailing list archive at Nabble.com.