[Elecraft] Line In not working ?

[Don Wilhelm]

Mario,

No problem here.

73,
Don W3FPR


Mario Lorenz wrote:
> Hello,
>
> getting finally around to setting up my K3 for RTTY/PSK,
> ie. hooking the line in/out to the computer, I noticed that
> Line In doesnt work for me.
>
> - Cables are OK (tested by plugging into MIC IN, the signal
> is rather loud but there)
> - MICSEL to LineIn, and line level have been tried up to 60
> - Some time ago when I had my K3 open I had done all the mods re. audio
> (mainly line out and the gnd mods) . I double-checked and all seems as
> per spec...
> - Using an ohmmeter to measure into line-in yields 630 ohm which looks
> about right as per schematic, so I didnt short-circuit things...
> - I updated firmware to 3.10
>
> Could someone please confirm that Line In does work with fw rev 3.10 ?
> Any further ideas ?
>
> Mario
>   
>