[Elecraft] memory problem

[Julian, G4ILO]

Steef PA2A wrote:
> 
> Hi,
> 
> I turned on the K3 today and all CW was gone. Pitch had become 000, where
> I always use 550. Filter width, LO and HI were giving strange results.
> 
> In LSB on 40 meters, if I tap memory M1-M4 the passband of the signals
> become smaller but LO/HI, BW and WIDTH do not change. Going to CW and back
> to LSB the receiver seems normal again. Because there is no KDVR3
> installed, I usually got the message: NO DVR or N/A when tapping one of
> the 4 memories. Now unpredictable things happen.
> 
> NORM also sets the receiver back to normal. Does anyone have the same
> problem? Reloading the firmware 257 a few times does not correct the
> problem.
> 
> 


-----
Julian, G4ILO. K2 #392  K3 #222.
http://www.g4ilo.com/ G4ILO's Shack   http://www.ham-directory.com/ Ham
Directory    http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 
-- 
View this message in context: http://n2.nabble.com/memory-problem-tp1386919p1386968.html
Sent from the Elecraft mailing list archive at Nabble.com.