SV: [Elecraft] K3 Beta firmware rev. 2.57

[Lennart Michaëlsson]

GM all,
not that I am one of those AM guys but just checked my K3 which produces 45W
on 160 and 40W on 80.
Maybe some set up trouble, Dave?
73
Len
SM7BIC

Wayne, the AM power level in this version only seems to produce a
carrier of 10 Watts when the requested power is "100W". While I don't
agree with the idea of calling the power anything other than the carrier
level, i.e. I would expect the power control to only go to about 30
Watts on AM, 10 Watts is only 1/3rd of the carrier power a 100 W nominal
transceiver should produce.

Back to the drawing board?

73 Dave, G4AON
K3/100 #80
==========================================

* MORE ACCURATE AM-MODE POWER LEVEL. Also slightly higher modulation
percentage.


_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com