[Elecraft] K3 Beta firmware rev. 2.57

[Dave G4AON]

Wayne, the AM power level in this version only seems to produce a 
carrier of 10 Watts when the requested power is "100W". While I don't 
agree with the idea of calling the power anything other than the carrier 
level, i.e. I would expect the power control to only go to about 30 
Watts on AM, 10 Watts is only 1/3rd of the carrier power a 100 W nominal 
transceiver should produce.

Back to the drawing board?

73 Dave, G4AON
K3/100 #80
==========================================

* MORE ACCURATE AM-MODE POWER LEVEL. Also slightly higher modulation
percentage.