[Elecraft] [K3] VFO A tracks VFO b, Help

[Igor Sokolov]

What a surprise! Cross band operation with 2 VFO is implemented even in my 
IC7000. I thought it is available in K3 as well especially with 2 complete RX 
build in.
Well I hope it will not take long to update the firmware to implement this 
feature because my K3 with KRX3 is on the way here and I was intending to use 
these 2 receivers to monitor 2 bands simultaneously.
\
73, Igor UA9CDC


> Ted,
>
> It has always worked like that.   If you previously had VFO A and VFO B 
> showing different bands, I would think you had a display problem.
> Currently even with the KRX3 installed, cross-band operation is not yet 
> implemented in the current firmware, but is being addressed as a planned 
> future firmware addition (only for those with the KRX3).
>
> 73,
> Don W3FPR
>
> wa6riv wrote:
>> I updated my firmware and caused a problem. I have not purchased a sub 
>> receiver and is not installed.
>> When I'm in VFO A, and do a band change, VFO B follows the same band.
>> I can swap A=>B or B=>A, move from A to B or B to A.
>> But I can't have VFO A on 40 meters and VFO B on 20 meters.
>> The Band switch transfers both VFO's to the same band at the same time.
>>  What have I done?  Tnx Ted 
>> WA6RIV ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: 
>> 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM
>>
>>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com