[Elecraft] K3 with N1MM question

[Randy Moore]

Even if I go to QSK and/or set the delay to 0, I still hear the same 
behavior - like the PTT is enabled throughout the transmission and no 
signals are heard through the receiver.  When sending with my paddles, I 
hear normal QSK behavior.  I must have some configuration parameter set 
wrong in either the K3 or N1MM, or both!

David Wilburn wrote:
> I was running QSK with N1MM.  I usually set the delay to 0.  With 
> delay set to zero, I cannot tell a big differnce with QSK on or off 
> (on the K3) when using N1MM to key the rig.
>
> David Wilburn
> NM4M
> http://www.nm4m.com