[Elecraft] Re: K3 and DXBase

[Don Wilhelm]

Bill,

If you are using a USB to serial adapter, try setting the speed as high 
as you can - it is counterintuitive, but many adapters have problems at 
low speeds but work fine at higher speeds.  Again make sure everything 
is set for the same speed.
If you possibly can, try using a real serial port, at least as a trial.

73,
Don W3FPR

Bill Parry wrote:
> Thanks to all that responded.
>
> +The manual said specifically not check DTR and RTS, so I did not.  I tried
> to check them and it made no difference.
>
> +The radio, the comport (6) and DXBase are all set to 4800 baud.
>
> I have not tried to use the 38,400 baud setting, but I have had more than
> one person say that the 4800 does work. If I was more knowledgeable, I could
> be a little more specific.  (Maybe I should call the Geek Squad :-)
>
> Brendan, I believe that you sent the update for radio.ini but I didn't want
> to add another variable to a situation that I am at a loss how to fix.
>
> Bill
>   
>