[Elecraft] Mini-modules: BL1 vs BL2 dimensions

[Steef PA2A]

The BL2 PC board is 1.5 x 3.8 inch. The enclosure will be at least 1.5 x 4.0 
inch.

Steef PA2A

----- Original Message ----- 
From: "Ron D'Eau Claire" <ron at cobi.biz>
To: "'Dave Van Wallaghen'" <w8fgu at comcast.net>; <elecraft at mailman.qth.net>
Sent: Sunday, November 02, 2008 6:19 PM
Subject: RE: [Elecraft] Mini-modules: BL1 vs BL2 dimensions


>I don't have a BL2 on hand, but the BL1 pc board is 1.5 x 3 inches.
>
> Ron AC7AC
>
> -----Original Message-----
>
> Does anyone know if the PCB dimensions for the BL1 & BL2 are the same? I
> had a customer needing an enclosure for his BL1 and asked me if it would
> fit in my BL2 enclosure. I looked at the manuals on the Elecraft site,
> but found no dimension info for the BL1.
>
> Thanks in advance & 73,
> Dave W8FGU
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>