[Elecraft] K3 Serial Commands?

[n4lq]

IF someone would just give me one command in the proper syntax I think i 
could figure this out. I read the manual but it's really vague.
Steve Ellington
N4LQ at insightbb.com
----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: "n4lq" <n4lq at insightbb.com>
Cc: <Elecraft at mailman.qth.net>
Sent: Thursday, May 15, 2008 7:25 PM
Subject: Re: [Elecraft] K3 Serial Commands?


> Steve,
>
> I suggest that you read the entire Programmer's Reference paying
> particular attention to the command syntax.  There is more to it than
> just entering the command itself.  During that reading process, you
> should then understand GET and SET.   Try a few commands from a terminal
> program first to get a feel for the syntax and command usage.
> After that, review your logging application to see if it automatically
> adds anything to that which you enter into the macro - if it does, that
> will have to be taken into consideration.
>
> 73,
> Don W3FPR
>
> n4lq wrote:
>> That didn't help. I tried entering FWxxxx4 and nothing happens as if
>> nothing is being sent. There must be something that preceeds the
>> command. The manual keeps mentioning GET and SET....Are you supposed
>> to enter that somewhere?
>> Steve Ellington
>> N4LQ at insightbb.com
>> ----- Original Message ----- From: "Don Wilhelm" <w3fpr at embarqmail.com>
>> To: "n4lq" <n4lq at insightbb.com>
>> Cc: <Elecraft at mailman.qth.net>
>> Sent: Thursday, May 15, 2008 6:01 PM
>> Subject: Re: [Elecraft] K3 Serial Commands?
>>
>>
>>> Steve,
>>>
>>> Look at the "FW" commamd in the KIO2 Programmer's Reference.
>>>
>>> 73,
>>> Don W3FPR
>>>
>>> n4lq wrote:
>>>> I'm trying to configure Mixw macros so it will send commands to select
>>>> various filters, FL2 etc....
>>>> The "Programmer's Reference isn't much help to me. I was able to
>>>> interpet the commands for my IC-7800 easily but this has me stumped.
>>>> Can someone help me get started by telling me the command format for
>>>> one of the filters?
>>>>
>>>> Steve Ellington
>>>> N4LQ at insightbb.com
>>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date:
>> 5/15/2008 7:24 AM
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date: 
>> 5/15/2008 7:24 AM
>>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.23.16/1445 - Release Date: 5/15/2008 
7:25 PM