[Elecraft] K3 Serial Commands?

[Don Wilhelm]

Steve,

I suggest that you read the entire Programmer's Reference paying 
particular attention to the command syntax.  There is more to it than 
just entering the command itself.  During that reading process, you 
should then understand GET and SET.   Try a few commands from a terminal 
program first to get a feel for the syntax and command usage.
After that, review your logging application to see if it automatically 
adds anything to that which you enter into the macro - if it does, that 
will have to be taken into consideration.

73,
Don W3FPR

n4lq wrote:
> That didn't help. I tried entering FWxxxx4 and nothing happens as if 
> nothing is being sent. There must be something that preceeds the 
> command. The manual keeps mentioning GET and SET....Are you supposed 
> to enter that somewhere?
> Steve Ellington
> N4LQ at insightbb.com
> ----- Original Message ----- From: "Don Wilhelm" <w3fpr at embarqmail.com>
> To: "n4lq" <n4lq at insightbb.com>
> Cc: <Elecraft at mailman.qth.net>
> Sent: Thursday, May 15, 2008 6:01 PM
> Subject: Re: [Elecraft] K3 Serial Commands?
>
>
>> Steve,
>>
>> Look at the "FW" commamd in the KIO2 Programmer's Reference.
>>
>> 73,
>> Don W3FPR
>>
>> n4lq wrote:
>>> I'm trying to configure Mixw macros so it will send commands to select
>>> various filters, FL2 etc....
>>> The "Programmer's Reference isn't much help to me. I was able to
>>> interpet the commands for my IC-7800 easily but this has me stumped.
>>> Can someone help me get started by telling me the command format for
>>> one of the filters?
>>>
>>> Steve Ellington
>>> N4LQ at insightbb.com
>>>
>
>
> -------------------------------------------------------------------------------- 
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date: 
> 5/15/2008 7:24 AM
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date: 5/15/2008 7:24 AM
>