[Elecraft] Re: losing FL5

[wayne burdick]

Hi Eric,

This should not have happened. You may need to re-set the filter's 
center frequency using the FL5 FRQ menu entry. Typically the 200-Hz 
filter has an offset of around -0.90 kHz.

Also make sure that FL5 BW is set to 0.20, and that you have REFCAL 
properly calibrated against a reference signal.

73,
Wayne
N6KR

On May 4, 2008, at 10:00 AM, Eric wrote:

> Seems I lost my 200 Hz filter after the update. In config the filter 
> is ON, everything looks OK, but al sigs are lost when FL5 kicks in 
> when turning WIDTH.

---

http://www.elecraft.com