[Elecraft] K3 60m ERR TXG

[David Woolley (E.L)]

Dave G4AON wrote:

> 
> On another 5 MHz issue, the spurious levels are poor and below 
> specification on frequencies below the point where a relay clicks (5.250 

If the relay has clicked, you are no longer on the 60m band.  If you 
have the broadcast filters, you may well be in general coverage mode. 
Unless you have the rig configured to disable out of band operation (I 
think that is the factory default), there seems to be no problem.

> MHz), above that point they are OK.  There are spurious signals approx 1 
> MHz either side of the main signal that are -46 dBc when the output is 
> 95 Watts on 5.150 MHz.

The lowest UK authorised channel centre is 5260kHz , making the lowest 
channel edge 5258.5kHz

Incidentally, looking at the RSGB 5MHz FAQ 
<http://www.rsgb-spectrumforum.org.uk/5mhz%20faqs.htm>, it would seem 
that amateur equipment capable of 5MHz operation without modification 
can't be CE approved.


-- 
David Woolley
"The Elecraft list is a forum for the discussion of topics related to 
Elecraft products and more general topics related ham radio"
List Guidelines <http://www.elecraft.com/elecraft_list_guidelines.htm>