[Elecraft] how to build interface cable between K3 and XV144

[Don Wilhelm]

Johnny

Check the reflector archives for the past 3 days.  The cable wiring
required was discussed then in several posts.

73,
Don W3FPR

Johnny Siu wrote:
> Hello Ron,
> 
> Thanks for your reply.
> 
> Yes, I did read p.9 of the XV144 operation manual.  However, it only shows the interface cable from XV144 to KI02 of K2 and NOT K3.
> 
>>From reading of the K3 manual, the RS232 socket has a different usage in K3 and the wiring is not similar to KI02. Is my understanding correct?  If yes, where can I find similar diagram as that in p.9 of the XV144 manual for building the interface cable between XV144 and K3.
>