[Elecraft] how to build interface cable between K3 and XV144

[Johnny Siu]

Hello Ron,

Thanks for your reply.

Yes, I did read p.9 of the XV144 operation manual.  However, it only shows =
the interface cable from XV144 to KI02 of K2 and NOT K3.

>From reading of the K3 manual, the RS232 socket has a different usage in K3=
 and the wiring is not similar to KI02. Is my understanding correct?  If ye=
s, where can I find similar diagram as that in p.9 of the XV144 manual for =
building the interface cable between XV144 and K3.

cheers,

Johnny Siu VR2XMC
--- 2008=A6~6=A4=EB27=A4=E9 =ACP=B4=C1=A4=AD=A1ARon D'Eau Claire <ron at cobi.=
biz> =BCg=B9D=A1R

> =B1H=A5=F3=A4H: Ron D'Eau Claire <ron at cobi.biz>
> =A5D=C3D: RE: [Elecraft] how to build interface cable between K3 and XV14=
4
> =A6=AC=A5=F3=A4H: vr2xmc at yahoo.com.hk, "'Elecraft'" <elecraft at mailman.qth=
.net>
> =A4=E9=B4=C1: 2008 6 27 =ACP=B4=C1=A4=AD =A4U=A4=C8 11:03
> Hello Johnny:
>=20
> You should have received the "Elecraft Transverter
> Models XV50, XV144,
> XV222, XV432 Owner's Manual" with your transverter
> kit. It's separate  from
> the assembly manual. See page 9 of that manual for the
> details.=20
>=20
> If you don't have it, it's available for download
> here:
>=20
> http://www.elecraft.com/manual/XV%20Transverter%20Owner's%20Manual-D.pdf
>=20
> Ron AC7AC
>=20
=0A=0A_______________________________________=0A YM - =C2=F7=BDu=B0T=AE=A7=
=0A =B4N=BA=E2=A7A=A8S=A6=B3=A4W=BA=F4=A1A=A7A=AA=BA=AAB=A4=CD=A4=B4=A5i=A5=
H=AFd=A4U=B0T=AE=A7=B5=B9=A7A=A1A=B7=ED=A7A=A4W=BA=F4=AE=C9=B4N=AF=E0=A5=DF=
=A7Y=AC=DD=A8=EC=A1A=A5=F4=A6=F3=BB=A1=B8=DC=B3=A3=C9N=A8=AB=A5=A2=A1C=0A h=
ttp://messenger.yahoo.com.hk