[Elecraft] Re: K3 CW-in-SSB mode: force CW VOX?

[Joe Subich, W4TV]

> In version 1.96 CW in SSB mode, CW happens (with RF) 
> irrespective of whether true CW mode is PTT or VOX.  

OK - I missed that one.  2.02 also seems to produce RF (CW in 
SSB) whether the true CW mode is PTT or VOX.  The unexpected 
item is that it does so with full QSK (no "hang") if CW VOX 
is off.     

Wayne, I guess the suggestion should not have been to force 
CW VOX (which is already being done) but to respect the QSK 
setting <G>.  

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Harris
> Sent: Monday, June 09, 2008 1:16 PM
> To: Elecraft Reflector; wayne burdick
> Subject: Re: [Elecraft] Re: K3 CW-in-SSB mode: force CW VOX?
> 
> 
> G'day,
> 
> I don't figure this.  In version 1.96 CW in SSB mode, CW 
> happens (with RF) 
> irrespective of whether true CW mode is PTT or VOX.  At least 
> on #345 it 
> does.
> 
> Regards,
> 
> Mike VP8NO
> 
> ----- Original Message ----- 
> From: "wayne burdick" <n6kr at elecraft.com>
> To: "Elecraft Reflector" <elecraft at mailman.qth.net>
> Sent: Monday, June 09, 2008 12:34 PM
> Subject: [Elecraft] Re: K3 CW-in-SSB mode: force CW VOX?
> 
> 
> | Joe,
> |
> | I'm OK with this if there are no serious objections to it. It's an 
> | easy firmware change.
> |
> | 73,
> | Wayne
> | N6KR
> |
> | > Joe Subich, W4TV wrote:
> | >
> | > > They only suggestion I would make for the firmware is 
> to force CW 
> | > > VOX ON while in SSB mode if "Auto CW" is enabled.  I generally 
> | > > prefer PTT mode for both CW and SSB but it would be handy to 
> | > > override CW PTT if Auto CW was enabled.
> |
> |
> | ---
> |
> | http://www.elecraft.com
> |
> | _______________________________________________
> | Elecraft mailing list
> | Post to: Elecraft at mailman.qth.net
> | You must be a subscriber to post to the list.
> | Subscriber Info (Addr. Change, sub, unsub etc.): 
> | http://mailman.qth.net/mailman/listinfo/elecraft
> |
> | Help: http://mailman.qth.net/subscribers.htm
> | Elecraft web page: http://www.elecraft.com
> 
> 
> --------------------------------------------------------------
> ------------------
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 8.0.100 / Virus Database: 270.0.0/1489 - Release 
> Date: 07/06/2008 
> 11:17
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com