[Elecraft] K3 kit problem

[WILLIS COOKE]

I had the same experience with 1025 except that when I
went back to the VCO CAL stage I got a error. 
Attempts to cure the problem working with Elecraft
were not successful and I returned the transceiver to
Elecraft.  They have had it since last Monday and I
have not heard anything yet.  I don't know if they are
having difficulty or if they have a cue and have not
worked on it yet.  I hope to hear something soon.

Cookie, K5EWJ

--- Dave Hachadorian <K6LL at ARRL.net> wrote:

> Just finished building K3 sn 1176. When I went to do
> the 
> reference oscillator calibration by zero-beating
> with WWV, I 
> found that the receiver is deaf. Even with a large
> antenna 
> connected, there is no increase in background noise,
> and no 
> signals can be heard.
> 
> When I turned the K3 off and then on again, it came
> up with 
> ERR IO1. Scary stuff. Any suggestions?
> 
> Thanks.
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
> 
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>