[Elecraft] K3: CW delay is used when exiting XMIT mode manually

[AB7R]

Thanks all.  Yes this is a bug and will corrected soon.  Thanks for finding
this.

73
Greg
AB7R


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Alexandr Kobranov
Sent: Saturday, January 12, 2008 1:14 PM
Cc: Elecraft Mail List
Subject: Re: [Elecraft] K3: CW delay is used when exiting XMIT mode
manually


John,
as I already comment directly to you - what is important for me is to
know if this delay is also in VOX-off situation. I hope not, only want
to be sure. If VOX-on and semi-BK then I understand and expect such
delay, if VOX-on and full-BK (QSK) there will be also some delay
probably but related to QSK delay which is not important.
So can anybody confirm behaviour (presence of any delay) vhen VOX-off
and XMIT activated/deactivated?

Thanks and 73!
Lexa, ok1dst

John [K7SVV] napsal(a):
> Alexandr,
>        The delay I am referring to only occurs when I am using MOX and
> returning to receive mode while in CW mode.  I thought I saw the same
> symptom yesterday while I was DATA mode and receiving RTTY but that
> wasn't the case today when I checked it.   I stepped through all of the
> modes and I only saw the delay returning to receive while using MOX in
> CW mode.  I don't see any reason for the delay.  When I press XMIT to
> leave xmit mode, I expect the the rig to do just that and with no
> delays.  I guess I find the delay a bit annoying.
>
> John    [K7SVV]
> ----- Original Message ----- From: "Alexandr Kobranov"
<kobranov at amoscz.cz>
> Cc: "Elecraft Mail List" <elecraft at mailman.qth.net>
> Sent: Friday, January 11, 2008 2:26 PM
> Subject: Re: [Elecraft] K3: CW delay is used when exiting XMIT mode
> manually
>
>
>> Hi John,
>> sorry for question (as not on my table yet) - is this delay in any
>> case of CW mode or only when any kind of QSK is active?
>> I suppose there is PTT mode for CW also and you are right that in such
>> case there is no reason for any delay. If you have QSK active, I can
>> understand that there is delay also with MOX using (without opinion if
>> this is bug or not - simply understand this :-)).
>> Can you let me know if delay is also in PTT mode?
>> thanks
>> lexa, ok1dst
>>
>>
>> John [K7SVV] napsal(a):
>>> I should have mentioned that this happens in CW mode and not SSB mode.
>>>
>>> John    [K7SVV]
>>> ----- Original Message ----- From: "John [K7SVV]" <k7svv at arrl.net>
>>> To: "Elecraft Mail List" <elecraft at mailman.qth.net>
>>> Sent: Friday, January 11, 2008 1:41 PM
>>> Subject: [Elecraft] K3: CW delay is used when exiting XMIT mode manually
>>>
>>>
>>>> I do not see the need for using the CW delay time when manually
>>>> exiting xmit mode when I press the XMIT button.  I would expect the
>>>> rig to return to receive mode as soon as the button is pressed.  If
>>>> I set the CW delay to zero, the return is instantaneous.  I admit
>>>> that I only rarely use the manual XMIT mode but I find it
>>>> distracting when I do.
>>>>
>>>> John    [K7SVV]
>>>> _______________________________________________
>>>> Elecraft mailing list
>>>> Post to: Elecraft at mailman.qth.net
>>>> You must be a subscriber to post to the list.
>>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>> http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/subscribers.htm
>>>> Elecraft web page: http://www.elecraft.com
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
>>>> 269.19.1/1219 - Release Date: 1/11/2008 10:19 AM
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>> http://mailman.qth.net/mailman/listinfo/elecraft   Help:
>>> http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
>> 269.19.1/1220 - Release Date: 1/11/2008 6:09 PM
>>
>>
>
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.2/1221 - Release Date: 1/12/2008
2:04 PM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.2/1221 - Release Date: 1/12/2008
2:04 PM