[Elecraft] K3 phantom power

[Tim O'Rourke]

I have a preamp with phantom power made by Samson I believe it was $48. I noticed that Ramsey Kits has it listed in their latest catalog.
Tim W4YN

>
>Message: 9
>Date: Tue, 8 Jan 2008 05:38:02 -0700
>From: "Darwin, Keith" <Keith.Darwin at goodrich.com>
>Subject: RE: [Elecraft] K3 phantom power
>To: <elecraft at mailman.qth.net>
>Message-ID:
>	<C7C5C325E5EB764E95A3CB7E174692A403719EDE at nhc0ex13.goodrich.root.local>
>	
>Content-Type: text/plain;	charset="us-ascii"
>
> 
>Bob & others, 
>
>I think the easiest way to get 48 VDC phantom power for a "real" mic is
>to put a small mixing board or mic preamp between the mic and rig.  I
>have a (yuck, spit) Behringer board that cost me $100 about 10 yrs ago
>that provides phantom power on 4 channels plus some EQ and, of course,
>mixing capabilities.  Or I can use my Mackie board to do the same.
>That's how I run good mic into my rig.  If you don't want a mixer, you
>can get several different mic preamps that will provide the phantom
>voltage the mic needs.
>
>- Keith N1AS -
>- K2 5411.ssb.100 -
>- K3 Wave 3 -
>
>-----Original Message-----
>> Would it be possible for the K3 to provide 48volt "Phantom" power for 
>> profesional condensor microphones?
>> Thanks!
>
>

Tim O'Rourke 
W4YN at ARRL.Net
Low Power Amateur Radio Rocks 
Member of Flying Pigs,ARCI,GQRP,RSGB,ARRL Life Member
NHRA Life Member