[Elecraft] RE: K3 with Microkeyer2

[Joe Subich, W4TV]

Disable router queries or set the radio type to "none" before 
initiating an upload.  At least two of the K3 beta test team 
have microHAM devices and perform uploads through them. 

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support at microham.com 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Peter Bacon
> Sent: Thursday, February 21, 2008 5:25 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] RE: K3 with Microkeyer2
> 
> 
> I have tried unsuccessfully to upload K3 firmware upgrades 
> via my Microkeyer
> II and use the KUSB cable instead.  I have my Microkeyer 
> talking to the K3
> at 38400 bps all the time.  I found that I would get part way 
> through a
> firmware upgrade and then it would hang up.  I recommend you 
> stick to the
> KUSB.
> 73 Peter G3ZSS
> 
> 
> Message: 40
> Date: Thu, 21 Feb 2008 00:43:03 -0500
> From: "John Gaynard" <jgaynard at columbus.rr.com>
> Subject: [Elecraft] K3 with Microkeyer2
> To: <elecraft at mailman.qth.net>	
> Message-ID: <02c301c8744c$a0a05de0$6a00a8c0 at GaynardTablet>
> Content-Type: text/plain;	charset="US-ASCII"
> 
> Can the Microkeyer II USB interface be used to upload 
> firmware upgrades with
> the K3?
> 
> John K8WDN
> K3  S/N #157
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com