[Elecraft] RE: K3 with Microkeyer2

[Peter Bacon]

I have tried unsuccessfully to upload K3 firmware upgrades via my Microkeyer
II and use the KUSB cable instead.  I have my Microkeyer talking to the K3
at 38400 bps all the time.  I found that I would get part way through a
firmware upgrade and then it would hang up.  I recommend you stick to the
KUSB.
73 Peter G3ZSS


Message: 40
Date: Thu, 21 Feb 2008 00:43:03 -0500
From: "John Gaynard" <jgaynard at columbus.rr.com>
Subject: [Elecraft] K3 with Microkeyer2
To: <elecraft at mailman.qth.net>	
Message-ID: <02c301c8744c$a0a05de0$6a00a8c0 at GaynardTablet>
Content-Type: text/plain;	charset="US-ASCII"

Can the Microkeyer II USB interface be used to upload firmware upgrades with
the K3?

John K8WDN
K3  S/N #157