[Elecraft] Paddle for K3

[David Yarnes]

I have an entirely different problem!  When I hook my paddle up to my K3, it 
seems to send with a distinctively italian accent.  None of the firmware 
updates address this issue, and I am totally frustrated.  Do you suppose the 
problem could be that I am using a Begali paddle?  Help!

Dave W7AQK


----- Original Message ----- 
From: "WS6X" <ws6x at comcast.net>
To: "'n4lq'" <n4lq at insightbb.com>; <elecraft at mailman.qth.net>
Sent: Friday, August 08, 2008 6:20 AM
Subject: RE: [Elecraft] Paddle for K3


>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of n4lq
>
> BTW: I find that my Windom antenna works better on CW than on SSB. Could
> this the short and long halves of the antenna be the cause?
>
> =====
> Well, yes, here's why! You'll find that if you switch to "ALT" in SSB the
> Windom performance matches that on CW. Likewise, if you switch to "CW REV"
> mode, the Windowm performance is down. This is of course, determined by 
> the
> polarity of your Windom feedline (whether the coax center or shield is
> hooked to the longer side of the Windom). This effect can be equalized
> slightly by using balanced feeders.
>
> GL,
>
> Jim, WS6X
>
>
>
> Steve Ellington
> N4LQ at insightbb.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>