[Elecraft] Paddle for K3

[Greg - N4CC]

Didn't realize Heisenluft was on the reflector...It's August ... not 
April...but chuckled at both the posts...  73 de Greg
(by the way, my old analog paddle works fine with the K3)

At 09:20 AM 8/8/2008, you wrote:


>-----Original Message-----
>From: elecraft-bounces at mailman.qth.net
>[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of n4lq
>
>BTW: I find that my Windom antenna works better on CW than on SSB. Could
>this the short and long halves of the antenna be the cause?
>
>=====
>Well, yes, here's why! You'll find that if you switch to "ALT" in SSB the
>Windom performance matches that on CW. Likewise, if you switch to "CW REV"
>mode, the Windowm performance is down. This is of course, determined by the
>polarity of your Windom feedline (whether the coax center or shield is
>hooked to the longer side of the Windom). This effect can be equalized
>slightly by using balanced feeders.
>
>GL,
>
>Jim, WS6X
>
>
>
>Steve Ellington
>N4LQ at insightbb.com
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com