[Elecraft] K1 20 meter band

[Don Wilhelm]

Ken,

Just replace the crystal and it should begin working again.  After 
replacing the crystal, you may need to adjust the CAL OPF setting to 
restore correct dial calibration on 20 meters.

73,
Don W3FPR

ken.holland at evonik.com wrote:
> Hello all, I'm new to the list.  I have a K1 and the 20 meter band has
> died.  The rig worked nicely for almost a yr, then 20 meters has no receive
> or transmit.  The 22.000 mhz crystal does not oscillate...  I can not pick
> up even a peep on my 756Pro.  The other 3 bands work nicely - 40, 30, and
> 17 meter bands  I have the 4 band module.
>
> Is there anything in the circuit I should be looking at before ordering a
> new crystal?
>
> Thanks to all for any info.
>
> 73 de Ken H.
> K9FV_______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>