[Elecraft] SignaLink USB and K2

[John Shadle]

...and the audio input cable you mention is from the fixed audio output 
mod featured on Don's page does, right?

I'm still working on my K2 but I wanted to make sure I knew that the 
fixed audio output mod was required for use with the SignaLink USB 
before I started drilling holes in my case. ;)

Thanks.
-john W4PAH

Lee Buller wrote:
> John,
> 
> That is right.....the output of the SignaLink USD goes from the RJ45 to 
> the Mic input.  But, you have to add one more cable....the audio from 
> the K2 to the SignaLink USB.  So, what you do is come out of the RJ45 
> with Transmitt Audio and the PTT line.  Then use a seperate cable for 
> the audio input from the K2.  You will need to use the Mic connector ... 
> at least I did not mine ... because I had no other means of feeding 
> audio to the K2.  You have to wire the Mic as your K2 is wired which 
> could be anything...depending on the builder.
> 
> Lee