[Elecraft] SignaLink USB and K2

[Lee Buller]

John,

That is right.....the output of the SignaLink USD goes from the RJ45 to the Mic input.  But, you have to add one more cable....the audio from the K2 to the SignaLink USB.  So, what you do is come out of the RJ45 with Transmitt Audio and the PTT line.  Then use a seperate cable for the audio input from the K2.  You will need to use the Mic connector ... at least I did not mine ... because I had no other means of feeding audio to the K2.  You have to wire the Mic as your K2 is wired which could be anything...depending on the builder.

Lee
 

In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?