[Elecraft] K3 Mic Menu,TX Equalizer & Low Power Software Request

[Eric Swartz - WA6HHQ Elecraft]

I just discussed this with Wayne. It was an oversight and we will 
definitely do this in an upcoming K3 f/w release.
73, Eric   WA6HHQ

_..._



Don Nesbitt wrote:
> Julian - I had not gotten that far with my K3 but just checked it - and -
> couldn't agree more!  Auto on Ant1 is Auto on Ant2, Bypass on Ant1 is Bypass
> on Ant2 - these need to be independent.
>
> 73 -- Don N4HH K3 #83
>
> <SNIP> Julian wrote:
>
> I can tune my MFJ magnetic loop using 1W and reading the SWR off the
> KAT2 in CAL S mode. But it's really annoying to do this and hear the
> KAT2 start clicking away because I'd switched to the other antenna and
> put the KAT2 on AUTO again and forgotten to switch it off when going
> back to the loop.
>
> If the KAT3 could be configured separately for the two antenna
> sockets, that would be a big plus for me.
>