[Elecraft] K3 Mic MH2 on K2
N2TK, Tony
tony.kaz at verizon.net
Mon May 14 07:44:14 EDT 2007
Is it possible to use one of the Heil mike adapters? When I go offshore I
take my Heil headset in a pouch. I also have a Icom, Yaesu and Kenwood Heil
adapters in the pouch. This way I can plug into any rig. If the K3 is wired
as a Kenwood, can't you just use the Kenwood mike adapter?
Or if your mike requires voltage on the mike, can you use one of the other
Heil adapters?
N2TK, Tony
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, May 14, 2007 1:41 AM
To: Bernard Gaffney, N8PVZ/QRP
Cc: w3fpr at arrl.net; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Mic MH2 on K2
Bernie,
In that case, build an adapter.
73,
Don W3FPR
Bernard Gaffney, N8PVZ/QRP wrote:
> Don,
>
> thanks for the reply. I may not have been clear in
> my original Post, but what I want to do is have the
> mics be interchangeable; i.e., be able to use either
> mic on either rig, not just on a specific rig. Sounds
> like that may not be possble, based on your reply?
>
> 72 de N8PVZ
> ---bernie
>
> --- Don Wilhelm <w3fpr at earthlink.net> wrote:
>
>> Bernie,
>>
>> It may be even easier than that - if you do not use
>> the MC-60 mic on a Kenwood transceiver, then you
>> can re-wire the 8 pin mic plug - just move the wire
>> currently connected to pin 5 to pin 6. If
>> there was something already connected to pin 6, you
>> will want to remove it (and you will lose the
>> function of whatever it accomplished).
>>
>> Since the Kenwood mic does not want a resistor
>> between 5 volts and pin 1 (AF), you must install
>> that resistor in the MH2 mic plug rather than
>> across the mic jack inside the K2. That action will
>> dedicate the MH2 mic to YOUR K2, but that may be OK
>> unless you try to sell the mic.
>>
>
>
>
>
____________________________________________________________________________
________
> 8:00? 8:25? 8:40? Find a flick in no time
> with the Yahoo! Search movie showtime shortcut.
> http://tools.search.yahoo.com/shortcuts/#news
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list