FW: [Elecraft] finished with the k2 for now.

[David Wilburn]

Yes, it most certainly does.

David Wilburn
dave.wilburn at verizon.net
K4DGW
K2 #5982


Brett gazdzinski wrote:
>  When you change the sidetone pitch, say to 800 Hz,
> the cpu does its magic and changes the bfo frequencies, per
> the manual (I keep re reading it).
> Mine seemed to take a while to update, or it needed to be
> power cycled or something, its real close to the 756 pro now.
> 
> The cpu seems to be doing lots of stuff inside the K2!
> 
> Brett
> N2DTS
> 
> 
>> -----Original Message-----
>> From: David Wilburn [mailto:dave.wilburn at verizon.net] 
>> Sent: Friday, March 23, 2007 11:22 PM
>> To: Brett gazdzinski
>> Cc: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] finished with the k2 for now.
>>
>> By default it is 600 Hz.  That is the ST P setting in the menu.
>>
>> David Wilburn
>> dave.wilburn at verizon.net
>> K4DGW
>> K2 #5982
>>
>>
>> Brett gazdzinski wrote:
>>> I re-did my filters tonight, made up a headphone adaptor,
>>> and did some tuning around after cleaning up the shack 
>>> from the rig building.
>>> I listened to 80 meters for about 1/2 an hour, the rig 
>>> seemed to be working very well, loads of signals on the air,
>>> and I went to send a V in an open spot and check the swr.
>>> That is when I found the antenna was not connected...
>>>
>>> I am going to wait for the kat2 antenna tuner to arrive
>>> before I worry any more about power output problems.
>>>
>>> One issue I have is the CW pitch. I had a mini QSO with the icom
>>> and the K2 seems to have a different offset, like 600 Hz
>>> difference, I corrected it with the K2 RIT.
>>>
>>> What sets the offset in the K2?
>>>
>>> Brett
>>> N2DTS
>>>
>>>
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>  http://mailman.qth.net/mailman/listinfo/elecraft    
>>>
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>>
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>