FW: [Elecraft] finished with the k2 for now.

[Brett gazdzinski]

 When you change the sidetone pitch, say to 800 Hz,
the cpu does its magic and changes the bfo frequencies, per
the manual (I keep re reading it).
Mine seemed to take a while to update, or it needed to be
power cycled or something, its real close to the 756 pro now.

The cpu seems to be doing lots of stuff inside the K2!

Brett
N2DTS


> -----Original Message-----
> From: David Wilburn [mailto:dave.wilburn at verizon.net] 
> Sent: Friday, March 23, 2007 11:22 PM
> To: Brett gazdzinski
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] finished with the k2 for now.
> 
> By default it is 600 Hz.  That is the ST P setting in the menu.
> 
> David Wilburn
> dave.wilburn at verizon.net
> K4DGW
> K2 #5982
> 
> 
> Brett gazdzinski wrote:
> > I re-did my filters tonight, made up a headphone adaptor,
> > and did some tuning around after cleaning up the shack 
> > from the rig building.
> > I listened to 80 meters for about 1/2 an hour, the rig 
> > seemed to be working very well, loads of signals on the air,
> > and I went to send a V in an open spot and check the swr.
> > That is when I found the antenna was not connected...
> > 
> > I am going to wait for the kat2 antenna tuner to arrive
> > before I worry any more about power output problems.
> > 
> > One issue I have is the CW pitch. I had a mini QSO with the icom
> > and the K2 seems to have a different offset, like 600 Hz
> > difference, I corrected it with the K2 RIT.
> > 
> > What sets the offset in the K2?
> > 
> > Brett
> > N2DTS
> > 
> > 
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft    
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> > 
>