[Elecraft] K2 SSB Option RP3 Question

[Don Wilhelm]

Whoops - I failed to see the KSB2 in the subject line, so I assumed a 
K2.  There are 2 RP3s  in the KSB2 - one mounts on the front panel board 
and is a 10K r-pak (last 3 digits - 103) and there is an RP3 that mounts 
on the KSB2 board of 2k in value (last 3 digits = 202).

73,
Don W3FPR

Clark Macaulay wrote:
> I'm buidling my K2 purchased at Dayton and found a problem when doing a parts inventory.  The Parts List designator for RP3 is far different than the part I received: it says 806345.  Does anyone know if this is a acceptable substitute?  There's nothing in the manual/Addenda nor in the reflector archives.
>