[Elecraft] rx audio output K2

[Dohn]

Isn't the position of the AF gain (volume?) dependent on the position of the
RF gain knob?  As I turn the "RF gain" knob clockwise, the AF gain (volume)
increases.  So it seems that the position of the AF gain knob is variable
with respect to the RF gain.

Just to get another thread going about this, I would ask where you best
position the RF gain knob when operating?

Dohn   N8EWY

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gregg R. Lengling
Sent: Sunday, January 07, 2007 12:08 PM
To: 'Mike Markowski'; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] rx audio output K2

This topic comes up many times over and over on the reflector.  If you radio
is properly aligned and built you should have plenty of rx audio with the
volume set at 8 or 9 o'clock.  In the past the major problem has been those
that don't have the AGC properly set and thus the AGC is reining in the
received signals.  The easiest test to see if you have the AGC set properly
is to just turn it off and if you have an increase in volume you are not
properly set.
[Gregg R. Lengling] 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.410 / Virus Database: 268.16.7/618 - Release Date: 1/6/2007