[Elecraft] Front Panel Board K2 06014 wheres RP3 10K 8 pin

[glblock at mchsi.com]

Ok, confused here.  On page 28 of the Owners Manual it says to check off the
items NOT installed.  If I have the SSB kit, which I do, it says to install them
now.

RP3 has some issues.. it says its a 10k resistor network and is supplied in the
SSB kit.  The board shows it as an 8 pin inline part.  The SSB parts had all the
parts BUT describes RP3 as a 2K 6 pin resistor network AND there is NO 10K
inline pin resistor chip in the SSB bag to put in the front panel board.

What goes in the RP3 slot on the Front panel board.  In the SSB manual it
describes RP3 as a 10K 8 pin but on page 3 RP3 is a 2.0K 6 pin ???

confused..