[Elecraft] [K3] Assembly

[Rick Dettinger]

> This may be common sense and/or mentioned in the Assembly Manual but:
> if your Phillips screwdriver does not have a magnetized tip it would
> be a good idea to find a magnet and lightly magnetize the tip. The K3
> is not tiny but it is close quarters inside. In many cases having the
> screwdriver magnetic field hold the screw (and the washer) sure beats
> trying to place the screw with your fingers (as I finally realized).

> Mike   W5FTD

================================
I have found that a small long nose pliers works well for holding nuts or
machine screws in place while applying torque to the other end.
73
Rick Dettinger
K7MW
K3 # (n-?)