[Elecraft] K2 CW Interface

[Joe-aa4nn]

You will need a separate cable between LPT port
and Key-in to the K2.  Set INP to Hand.  Wire
your favorite keyer output in parallel with the line
into the K2 Key-in.
de Joe, aa4nn

----- Original Message ----- 
From: "David Wilburn" <dave.wilburn at verizon.net>
To: "elecraft" <elecraft at mailman.qth.net>
Sent: Tuesday, December 04, 2007 3:27 PM
Subject: [Elecraft] K2 CW Interface


>I soldered up the cable to connect the K2 to the computer for logging
> and control.  What do I need to do from here to get the computer/rig to
> send CW during a contest?  I am currently using N3FJP's programs, and I
> plan on moving to N1MM.  I get the impression I need a separate cable
> between the LPT port and the paddle input?
> -- 
> 
> David Wilburn
> k4dgw at k4dgw.com
> K4DGW
> K2 S/N 5982
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>