[Elecraft] K3/100 + DX4WIN & N1MM

[Vic K2VCO]

Don Nesbitt wrote:

> Set:  4800, N, 8, 1, DTR = CW, RTS = PTT, Radio/VFO nr =1, Radio PTT Delay =
> 30, Radio PTT via command block checked

If you decide to use DTR/RTS, be aware that your computer may raise 
these lines during bootup. So if you are in CW mode when you boot your 
computer, you may unexpectedly transmit a dash or two.

I found the DTR CW to work very well, and I could get rid of the 
parallel port interface I was using for computer-generated CW. I don't 
use the PTT, just selecting full or semi QSK on the K3.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
K3 no. 00007