[Elecraft] K3/100 + DX4WIN & N1MM

[Don Nesbitt]

Gary - K3 #83 works great with N1MM.

Some of the features like "Wide and Narrow" filter switching are not yet
coded for the K3 in N1MM but the basics - freq set, band-map click, cw
keying, etc. work well.  It's very nice to just use a single RS-232
straight-thru cable between the K3 and the laptop for CW keying.

My settings in N1MM Config:

COM 7 set to K3 (your com will likely be different)

CW/Other block checked

Set:  4800, N, 8, 1, DTR = CW, RTS = PTT, Radio/VFO nr =1, Radio PTT Delay =
30, Radio PTT via command block checked

CONFIG Menu setting in K3 > PTT-KEY = rts-dtr, RS232 = 4800 b

Voila!  While I have not tried it, others have reported that you can set the
baud rate much higher as long as it is the same on both the K3 and in the
N1MM config.  Frankly, it behaves so well at the default that I've just left
it there!

Have fun -- 73 es gud dxing/contesting!  -- Don N4HH K3 #83

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gary Bartlett VE1RGB
Sent: Tuesday, December 04, 2007 1:34 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3/100 + DX4WIN & N1MM

<SNIP>.

 Has anyone out there made their K3 work with DX4WIN and/or N1MM that could 
either provide the setup parameters, or at least point me in the direction 
to find same?  If no answer here, then I'll go to the logging programs 
sites.

    Gary, VE1RGB 
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.16.13/1170 - Release Date: 12/4/2007
10:52 AM