[Elecraft] K3 Calibration Problem

[Craig Rairdin]

> The real problem is that after setting the power to "exactly
> 5.0 watts" and holidng TUNE, the power reading on 160 meters only 
> goes to 1.2 watts; when I tap TUNE to exit, VFO B says: ERR TXG.  
> Similar problems on other banads, to wit:  1.8 Watts on 80m, 1.4 
> Watts on 40m, 1.9 Watts on 20m, etc.

Make sure you've selected a filter that is at least 1 khz wide for CW
transmit. Otherwise you'll get the ERR TXG message.

Craig
NZ0R
K3/100 #25