[Elecraft] Re: K3 DATA-mode setup is saved and restored

[David Ferrington, M0XDF]

Yes! I was about to ask how that was easier than using a PC - right on the
button Wayne!

On 30/8/07 21:19, "elecraft-request at mailman.qth.net"
<elecraft-request at mailman.qth.net> sent:

> Message: 27
> Date: Thu, 30 Aug 2007 07:41:53 -0700
> From: wayne burdick <n6kr at elecraft.com>
> Subject: [Elecraft] K3 DATA-mode setup is saved and restored
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Cc: 'Bill Tippett' <btippett at alum.mit.edu>
> Message-ID: <0de157659ad3b454667b9c87c20cdbe7 at elecraft.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
> 
>> 
>> W4ZV queried:
>>>          Why wouldn't you store this setup in one of the Mx
>>> memories?  I assume it may have to do with the above
>>> parameters not all being available to store, but that's just
>>> a little more flash memory isn't it?  :-)
> 
> 
> Ed, W0YK, described the entire setup procedure for getting on
> CW-to-RTTY with the K3. I just wanted to clarify that all of those
> settings *are* saved in non-volatile memory, just like every other
> setting in the rig.
> 
> So, having set DATA MD to FSK, selected a mark pitch, and turned the
> text decoder ON, Ed could turn power off, switch modes, etc., and come
> back to these settings just by being in DATA mode.
> 
> 73,
> Wayne
> N6KR

-- 
The high minded man must care more for the truth than for what people
think. -Aristotle, philosopher (384-322 BCE)