[Elecraft] KPA100 High Wattage Resistors

[Don Wilhelm]

Ben,

The ratings are conservative, so they can be mounted right down on the
board, but there is no harm in leaving a small gap - EXCEPT for the one
mounted on the bottom of the board - that one must go right down to the
board for physical clearance reasons.

73,
Don W3FPR

> -----Original Message-----
>
> Should my 1W, 2W, and 3W resistors on my KPA100 be mounted
> pressed against the board, or should I leave some space between them?
>
> -Ben  K1NT
>