[Elecraft] K2 Part II Alignment Probs

[Mark Bayern]

I should have reiterated that the IF tuning slug bottoms out as the
snr is improving -- is something wrong with the IF frequency or is
this just a side effect of the filter problem?

Mark

On 5/4/06, Mark Bayern <mbayern at gmail.com> wrote:
> > If you indeed do have inverted sidebands, then re-check the BFO range test
> > and let us know what the high and low BFO frequencies are. and let us know
> > the number (x.x) that was marked on the envelope your crystals were packaged
> > in.
>
> Doing the BFO Test from page 62:
>
> BFO high freq 4916.20
> BFO low freq 4911.09
>
>
> BFO freqs measured at TP2.
>                          band+       band-
> FL1  4913.61   4916.21     4911.01
> FL2  4913.22   4916.20     4911.09
> FL3  4913.22   4916.20     4911.09
> FL4  4913.11   4916.20     4911.09
>
> The first column of freqs is the BFO frequency before pressing the B+
> or the B- button. Note that C22 (the 4.000MHz calib) is not calibrated
> at this time.
>
> The crystal envelope had a 3.7 (three point seven) written on its front.
>
>
> >
> > Also, do you have the KSB2 installed yet or not?
>
> KSB2 is not yet installed.
>
> Thanks!
>