[Elecraft] K2 Part II Alignment Probs

[Mark Bayern]

> If you indeed do have inverted sidebands, then re-check the BFO range test
> and let us know what the high and low BFO frequencies are. and let us know
> the number (x.x) that was marked on the envelope your crystals were packaged
> in.

Doing the BFO Test from page 62:

BFO high freq 4916.20
BFO low freq 4911.09


BFO freqs measured at TP2.
                         band+       band-
FL1  4913.61   4916.21     4911.01
FL2  4913.22   4916.20     4911.09
FL3  4913.22   4916.20     4911.09
FL4  4913.11   4916.20     4911.09

The first column of freqs is the BFO frequency before pressing the B+
or the B- button. Note that C22 (the 4.000MHz calib) is not calibrated
at this time.

The crystal envelope had a 3.7 (three point seven) written on its front.


>
> Also, do you have the KSB2 installed yet or not?

KSB2 is not yet installed.

Thanks!