[Elecraft] K2 IF Alignment Question

[Joe-aa4nn]

Are we speaking of the same L34?  Mine "peaked" at nearly the top,
not a turn or so from the top.  As I remember I was peaking for the
loudness of the noise; nary a signal around.
de Joe, aa4nn
-----------------------------------------------------------
----- Original Message ----- 
From: "Dan Barker" <dbarker at visioncomm.net>
To: <Elecraft at mailman.qth.net>
Sent: Saturday, July 01, 2006 6:49 AM
Subject: RE: [Elecraft] K2 IF Alignment Question


> You are not adjusting for the peak, you are adjusting for the maximum
> signal/noise. It does not occur at the peak signal. Unless you are using
> Spectrogram or some such, it is a trick to do by ear.
>
> That said, if your best S/N is at the top, I haven't a clue if you have a
> problem<g>.
>
> Dan / WG4S / K2 #2456
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of SABorns at aol.com
> Sent: Saturday, July 01, 2006 12:57 AM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] K2 IF Alignment Question
>
>
> The peak when adjusting L34  during IF alignment is at the top rather 
> than
> the l to 1 1/2 turns in mentioned in the manual. Has anyone else
> encountered
> this?
>
> 73 Steve K8IDN
>