[Elecraft] K2 IF Alignment Question

[Dan Barker]

You are not adjusting for the peak, you are adjusting for the maximum
signal/noise. It does not occur at the peak signal. Unless you are using
Spectrogram or some such, it is a trick to do by ear.

That said, if your best S/N is at the top, I haven't a clue if you have a
problem<g>.

Dan / WG4S / K2 #2456

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of SABorns at aol.com
Sent: Saturday, July 01, 2006 12:57 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] K2 IF Alignment Question


The peak when adjusting L34  during IF alignment is at the top rather  than
the l to 1 1/2 turns in mentioned in the manual. Has anyone else
encountered
this?

73 Steve K8IDN

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com